Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Line Supervision Set
Model: LBB4442/00
- Loudspeaker line monitoring without additional cabling
- Supervision-master mounting in the power amplifier
- Supervision-slave mounting at the end of the loudspeaker line
- Open-circuit fault detection
- Compatible with 100 V and 70 V loudspeaker lines
Product Info
Tech Specs
Documents
The Praesideo system uses a unique loudspeaker line monitoring principle, which requires no additional cable. The loudspeaker line itself is used to communicate with the supervision-slave installed at the end of the loudspeaker line.
The LBB 4442/00 contains the master and slave device for supervision of a single loudspeaker line. For supervision of multiple loudspeaker line branches and loudspeakers, the use of the LBB 4440/00 Supervision Control Board in conjunction with the LBB 4441/00 and LBB 4443/00 Supervision Boards is recommended.
Each amplifier channel in an LBB 442x/x0 or PRS?xPxxx Power Amplifier unit has an internal mechanical and electrical provision for an LBB 4442/00 master board. The slave board fits into the Bosch range of loudspeakers and can be mounted in the last speaker in the line, or in a separate housing at the end of the line. The short-to-ground and shortcircuit detection for the lines are incorporated in the power amplifier. Line faults are detected and reported within 100 s. The pilot tone generator for speaker monitoring is generated in the amplifier and powers the slave unit. Line monitoring can be switched on and off from the configuration software.
The LBB 4442/00 contains the master and slave device for supervision of a single loudspeaker line. For supervision of multiple loudspeaker line branches and loudspeakers, the use of the LBB 4440/00 Supervision Control Board in conjunction with the LBB 4441/00 and LBB 4443/00 Supervision Boards is recommended.
Each amplifier channel in an LBB 442x/x0 or PRS?xPxxx Power Amplifier unit has an internal mechanical and electrical provision for an LBB 4442/00 master board. The slave board fits into the Bosch range of loudspeakers and can be mounted in the last speaker in the line, or in a separate housing at the end of the line. The short-to-ground and shortcircuit detection for the lines are incorporated in the power amplifier. Line faults are detected and reported within 100 s. The pilot tone generator for speaker monitoring is generated in the amplifier and powers the slave unit. Line monitoring can be switched on and off from the configuration software.
- Loudspeaker line monitoring without additional cabling
- Supervision-master mounting in the power amplifier
- Supervision-slave mounting at the end of the loudspeaker line
- Open-circuit fault detection
- Compatible with 100 V and 70 V loudspeaker lines
- Supervision-slave powered from the power amplifier
- Meter/Monitor Type - Audio
- Tester Format - Board/Card
- Warranty - Yes
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 55 C
- Operating Temperature (Minimum): 5 C
- Certifications: CE, TUV
- Regulatory Compliance: EN 55103-2, EN 55103-1 / FCC-47part 5B
- Warranty (Length/Type): 3 Years
- Slave Dimensions: 16 x 80 x 60 mm
- Slave Weight: 50 g
- Master Dimensions: 17 x 60 x 50 mm
- Master Weight: 30 g
- Storage Temperature: -20 to +70 °C
- Humidity: 15 to 90 %
- Air Pressure: 600 to 1100 hPa
Bosch Conferencing and Public Address Systems - LBB 4442-00
762 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
Bosch Conferencing and Public Address Systems
Model: LBB4442/00
Request more information from a dealer near you
close