Universal DIN-rail Mountable Small Form Factor I/O Extension Relay Module
Series: Barix Barionet
Model: Barix R6
- 6x Relay output
- 1x RS-485 Serial port
- 9 to 30V Supply voltage
- Applications:
- Voice evacuation systems with 6 relays
Barix R6 is a DIN-rail mountable relay module for commercial control, power switching and home automation applications.<br>Using the industry standard Modbus protocol over 2-wire RS-485 the device can be controlled from any Modbus capable master.<br>Each relay has three connections (common, normally closed and normally open) available at screw terminal blocks supporting wires from AWG 26/0.15mm² up to AWG 14/2.5mm².<br>To connect to other Barix devices the Barix R6 features two extension connectors on both sides of the device carrying power and RS-485 signals (one extension cable included). Barix R6 supports Modbus/RTU protocol at speeds of 9600 and 19200 Bauds, with and without parity. Special commands have been added to the Barionet R6 to support also non Modbus native control systems. Up to 31 Barix extension units can be directly connected to a Modbus Master such as the Barix Barionet and can be increased to up to 250 devices using standard RS-485 repeaters. Using the Barix Barionet, the Barix R6 can be controlled by a local Basic application (BCL) as well as remotely using TCP, UDP, Modbus/TCP and SNMP.<br>Barix R6 is a low cost alternative to add high power switching capabilities to Modbus systems.
- 6x Relay output
- 1x RS-485 Serial port
- 9 to 30V Supply voltage
- Applications:
- Voice evacuation systems with 6 relays
- Switching power (lights, blinds, heating, power relays, motors)
- Activate bells, door strikes, indicators and alarms
- Software Barix R6 available:
- 6 relays (250VAC 10A, NO and NC)
- RS-485 serial interface
- Protocol: Modbus/RTU
- Two extension connectors for easy daisy chaining of power supply, additional relay units (R6), I/O units (IO12) etc.
- Systems Controlled - Audio
- Spec Sheet available - Yes
- Operating Temperature (Maximum): 40 C
- Operating Temperature (Minimum): 0 C
- Certifications: FCC, CE
- AC Voltage (Maximum): 24 Volts
- AC Voltage (Minimum): 12 Volts
- Active Power: 3.50 Watt
- DC Voltage: 30 Volts
- Depth: 84.84 mm
- Width: 104.90 mm
- Product Weight: 0.22 kg
- Number of RS-485 Serial Ports: 1
- Height: 71.88 mm
- Relays:
•6 relays (250VAC 10A, 16A maximum <1sec) on screw block with common, NO (normally open) and NC (normally closed) contacts
•for wires AWG 26 - AWG 14 / 0.15 - 2.5mm² - RS-485/Power/Expansion:
•Power/RS-485 on detachable screw block for wires AWG 28 - AWG 16/0.08 - 1.3mm²
•2 extension connectors (3-inch/75mm cable included) - RS-485/Protocol:
•RS-485 (2-wire), 9600/19200 Baud, 8 bit, Even/No parity software configurable
•Modbus/RTU protocol - Misc:
•1 LED for power indication
•1 LED for RS-485 active send indication
•6 LED for relay status indication
•Internal connector for default settings jumper - MTBF:
•Minimum 237 000h according to MIL217F at 25°C ambient temperature
Suggested Products
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au