Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
16 TRS Balanced Line-level Input Module
Series: Pro16
Model: AN-16/i v.2
- Sixteen balanced audio inputs (1/4-in TRS connectors)
- Sixteen balanced Thru connectors (TRS)
- A-Net In with four-position slot range selector switch
- Stereo Link switches for each channel pair
- Four-position gain switches (+22, +4, 0, -10dB)
Product Info
Tech Specs
Analog line-level audio input module connected to TRS inputs on AN-16/i v.2 is converted to digital and transmitted via Pro16 version of A-Net over Cat-5e cable to personal mixers or Pro16 output devices. AN-16/i v.2 can also generate enhanced version of Pro16 A-Net, Pro16e, required for use with A360 personal mixer when second Pro16 input device is connected to its A-Net In jack. AN-16/i v.2 merges its analog inputs with incoming A-Net stream, creating expanded Pro16e digital audio stream. Four slot range switches allow each AN-16/i v.2 in system to be assigned to one of four slot ranges supported by Pro16e protocol, increasing total audio sources available to personal mixing system to 64.
- Sixteen balanced audio inputs (1/4-in TRS connectors)
- Sixteen balanced Thru connectors (TRS)
- A-Net In with four-position slot range selector switch
- Stereo Link switches for each channel pair
- Four-position gain switches (+22, +4, 0, -10dB)
- Signal present and clip LEDs per channel
- Audio Inputs: 16, balanced line-level, 1/4-inch TRS connector
- Crosstalk: -90 dB
- Depth: 146.05 mm
- Frequency Response: 4Hz to 22kHz
- Input Impedance: 17.8 kiloohms
- Maximum Input Level: 22 dBu
- Power: 18 to 24Vdc, 500mA
- Width: 482.60 mm
- Inputs: Tip: Audio +, Ring: Audio, Sleeve: Ground
- Latency: <0.880 ms (measured from analog input to analog output)
- THD +N: < 0.003 %
- Signal to Noise (unweighted): 90 dB (typical, A/D to D/A)
- Analog to Digital Conversion: 48kHz sample rate, 24-bit
- Product Weight: 3.08 kg
- TRS Thru: Impedance matched output
- A- Net In: One Category 5 (RJ45 connector), Four-position slot range selector switch for use with Pro16e A-Net
- A-Net Out: One Category 5 (RJ45 connector) Supports Pro16 and Pro16e
- Line Inputs Impedance: 48 kiloohms
- Bit Error Rate (BER): 10(-12)
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
Aviom, Inc.
Model: AN-16/i v.2
Request more information from a dealer near you
close