Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Distribution Amplifier, 2 Input, 6 Output
Model: AMIS26
- 2 inputs can be balanced or unbalanced and each input's sensitivity can be switched between Mic and Line level
- Each of inputs is individually assignable to any of the 6 outputs via front panel DIP switches
- 6 outputs can again be balanced or unbalanced and feature up to -60dB of attenuation so they can be run as any combination of line level or mic level outputs
- Input level controls are screw diver adjustable trim pots
- Input level can boost or cut the input signal by up to 15dB
Product Info
Tech Specs
Documents
The Australian Monitor Installation Series AMIS26 is a high quality 2 input, 6 output distribution amplifier. The AMIS26 provides a low noise, feature packed, signal routing solution to cover a wide range of installation needs, at a contractor friendly price.
- 2 inputs can be balanced or unbalanced and each input's sensitivity can be switched between Mic and Line level
- Each of inputs is individually assignable to any of the 6 outputs via front panel DIP switches
- 6 outputs can again be balanced or unbalanced and feature up to -60dB of attenuation so they can be run as any combination of line level or mic level outputs
- Input level controls are screw diver adjustable trim pots
- Input level can boost or cut the input signal by up to 15dB
- Recessed DIP switches assign either input A or B to a desired output
- Output level controls are screw driver adjustable trim pots
- This level control attenuates the output level, with a range from -60dB at "Minimum" position, to 0dBat "Maximum" position
- Output Level DIP switch will change the output sensitivity of the desired output from Mic to line level
- 24V DC Phantom Power is also individually switchable per input
- 4 segment LED meters show the strength of each of the AMIS26's input signals
- LED segments are calibrated to the following level markings and show the following colours -20dBu (green), -10dBu (green), 0dBu (yellow), +10dBu (red)
- -24V DC Phantom power is also individually switchable per input
- Spec Sheet available - Yes
- Power Input: 24 VDC (regulated); 12VA max.
- Outputs: Mic/Line Switch 28dB
- Noise: -89dB
- Frequency Response: (0dB/-3dB) 10Hz - 50kHz
- Total Harmonic Distortion: Line In (XLR/RCA) 0.02%; Mic In (XLR) 0.1%
- Crosstalk: Better than 80dB
- Phantom Power: 24VDC
- Input Sensitivity: Line (XLR) 775mV (0dB); Mic (XLR) 10mV (-37dB); Line (RCA) 775mV (0dB)
- Dimensions: 44.0 x 482.0 x 168.0 (H x W x D) mm
- Maximum load protection: Net 2.5 kg (5.5 lb), Shipping 3.0 kg (6.6 lb)
AMIS26 Spec Sheet
347 kb
- Data Sheet
AMIS26 Manual
226 kb
- Instructions
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
Australian Monitor
Model: AMIS26
Request more information from a dealer near you
close