Microphone and Interface Kit for the Dante | AES67 Integrated Microphone System
Model: M3DK
- M3 Features:
- 100% RF shielding and immunity
- Very high output, low self-noise
- Frequency and pattern tailored for voice clarity and rejection of extraneous noise
- Evenly dispersed sound with undetectable phase
The M3DK is a convenient kit that pairs the Audix M3 hanging ceiling microphone with the Audix DN43 Dante | AES67 microphone interface, providing a simple to install, network-ready way to stream Audix audio performance through Ethernet networks.
The M3 is an innovative, tri-element hanging microphone designed for applications where aesthetics, sound quality, and ease of installation are critical. The frequency response and polar pattern of its three phase-coherent hypercardioid capsules are tailored for voice clarity and rejection of extraneous noise.
The Audix DN43 interface features one microphone port engineered exclusively for the Audix M3 tri-element microphone and one port for Audix RJ45-equipped single-element microphones. Each channel has selectable, independently controlled pre-amp gain, as well as low- and high-pass filters. It features balanced audio inputs with RFI filtering and delivers high-fidelity 24-bit, 48KHz audio.
- M3 Features:
- 100% RF shielding and immunity
- Very high output, low self-noise
- Frequency and pattern tailored for voice clarity and rejection of extraneous noise
- Evenly dispersed sound with undetectable phase
- High-quality silicone jacketed microphone cable with adjustable length and position
- Plenum-rated junction box with RJ45 connector
- TAA compliant
- Easy to install
- DN43 Features:
- Balanced audio inputs with RFI filtering
- High-fidelity 24-bit, 48KHz audio
- Each channel has selectable pre-amp gain, as well as low- and high-pass filters
- Two 5V logic outputs per port, with source/sink capability, for LEDs, if mic is so equipped
- One logic input per single-element microphone port for buttons
- 48V phantom power output
- Operates on PoE from any IEEE 802.3af compliant equipment
- Dante Domain Manager (DDM) ready
- Applications:
- Zone Capture
- Video Conferencing
- Distance Learning
- Hospital and medical procedure
- Includes:
- Mounting brackets for DN43 (pair MNTDN), with attachment screws
- 3 ft. plenum-rated CAT6 cable
- CBLM3TERM breakout cable
- (2) 1.56mm / 0.063inch seismic and fire cable restraints
- JBM3 plenum-rated junction box
- Dante Enabled - Yes
- Microphone Type - Condenser
- Polar/Pickup Pattern - Hypercardiod
- Spec Sheet available - Yes
- M3 Specefications:
•Frequency Response: 30Hz - 19kHz (Tailored)
•Impedance: 150Ohms
•Sensitivity: 34mV / Pascal at 1k - DN43 Specefications:
•Max Input: (0dB gain) -14dBu, 155mV
•Input Impedance (balanced): 1.15kohm
•Frequency Response: 15Hz - 22kHz, +0, -3dB
•Channel Crosstalk (1 kHz): < -80dB
•Dante™ / AES67 Channels: 4
•Low-pass Options: Off, 5kHz, 7kHz, 10kHz
•High-pass Options: 15Hz, 238Hz
•Gain Options 0dB, +8dB, +12dB, +15dB, +18dB, +24dB, 30dB, +36dB - Power:
•External DC Jack: +48VDC, 125mA
•PoE (IEEE 802.3af): CLASS 2 (3.84 - 6.49W)
Suggested Products
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au