Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Cardioid Condenser Boundary Microphone
Series: UniPoint
Model: U851A
- Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations
- PivotPoint rotating output connector allows cable to exit from either the rear or the bottom of the microphone
- Superior off-axis rejection for maximum gain before feedback
- UniGuard RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- UniSteep filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
Product Info
Tech Specs
Documents
The U851A cardioid condenser boundary microphone features a PivotPoint rotating output connector, UniSteep filter and UniGuard RFI-shielding technology. This battery- or phantom-powered condenser microphone accepts interchangeable condenser elements, available for boundary microphones in cardioid, hypercardioid and omnidirectional polar patterns. Its heavy die-cast case and silicon foam bottom pads minimize coupling of surface vibration to the microphone. With superior off-axis rejection and maximum gain-before-feedback, this professional microphone sets audio-quality standards in challenging acoustic environments.
- Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations
- PivotPoint rotating output connector allows cable to exit from either the rear or the bottom of the microphone
- Superior off-axis rejection for maximum gain before feedback
- UniGuard RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- UniSteep filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
- Small-diameter UniPoint capsule near boundary eliminates phase distortion and delivers clear, high-output performance
- Heavy die-cast case and non-slip silicon foam bottom pads minimize coupling of surface vibration to the microphone
- Low-profile design with low-reflectance black finish for minimum visibility
- Operates on battery or phantom power
- Microphone Type - Boundary
- Microphone Type - Condenser
- Polar/Pickup Pattern - Cardiod
- Polar/Pickup Pattern - Half-cardiod
- Warranty - Yes
- Spec Sheet available - Yes
- Cable Length: 762 cm
- Cable Length: 7.62 m
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 30 Hz
- Minimum Frequency Response (Bandwidth): 0.03 kHz
- Dynamic Range: 111 dB
- Impedance: 200 ohm
- Maximum SPL (Sound Pressure Level): 133 dB
- Sensitivity: -40 dB
- Signal to Noise Ratio: 72 dB
- Current Draw: 0 Amps
- Height: 23.11 mm
- Width: 84.07 mm
- Product Weight: 0.24 kg
- Warranty (Length/Type): 2 Years/Limited End-user
- Low Frequency Roll-off: 80Hz, 12dB/octave
- DC Voltage: 11 to 52 Volts
Boundary Microphone
512 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
Audio-Technica U.S., Inc.
Model: U851A
Request more information from a dealer near you
close