Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Omnidirectional Condenser Headworn Microphone
Model: BP893cW
- Outstanding clarity and intelligibility
- Lightweight and ergonomic design
- Extremely unobtrusive, 1-inch flexible boom
- Secure over-the-ear placement
- Extended frequency response for natural vocal reproduction
Product Info
Tech Specs
Documents
BP893 omnidirectional condenser headworn microphone, less power module. 1.4 m (55") permanently attached miniature cable terminated with locking 4-pin connector for use with Audio-Technica UniPak® body-pack wireless transmitters. Includes AT8440 cable clip, two AT8157 windscreens, two AT8156 element covers, a moisture guard, and a carrying case. Available in black and beige, wired and wireless models.
- Outstanding clarity and intelligibility
- Lightweight and ergonomic design
- Extremely unobtrusive, 1-inch flexible boom
- Secure over-the-ear placement
- Extended frequency response for natural vocal reproduction
- Fixed-charge back plate, permanently polarized condenser element
- Locking 4-pin microphone output connector compatible with included power module and all Audio-Technica UniPak body-pack wireless transmitters
- UniSteep filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
- Headset Mic Type - Condenser
- Microphone Connectivity - Wired
- Microphone Type - Condenser
- Polar/Pickup Pattern - Omnidirectional
- Warranty - Yes
- Spec Sheet available - Yes
- Cable Length: 1.40 m
- Cable Length: 140 cm
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Maximum Frequency Response (Bandwidth): 20 kHz
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Impedance: 245 ohm
- Maximum SPL (Sound Pressure Level): 114 dB
- Sensitivity: -34 dB
- Signal to Noise Ratio: 68 dB
- Current Draw: 0 Amps
- DC Voltage: 52 Volts
- Product Weight: 0 kg
- Warranty (Length/Type): 2 Years/Limited End-User
- Low Frequency Roll-off: 80 Hz 18 dB/octave (wired only)
- Open Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 Pa
- Phantom Power Requirements: 11 to 52 V DC 2 mA typical (wired only)
- Current Consumption: 0.10 mA typical at 5V (wireless only)
- Voltage Range: 2.5 to 11 V (wireless only)
- Weight:
- Power module (wired only): 85g (3.0 oz)
- Dimensions:
- Microphone: 8.1 mm (0.32") long, 2.6 mm (0.10") diameter
Boom: 26.4 mm (1.04") long, 1.07 mm (0.04") diameter
Power module (wired only): 97.6 mm (3.84") long, 18.9 mm (0.74") diameter - OUTPUT CONNECTOR (POWER MODULE): Integral 3-pin XLRM-type
- Cable: 1.4 m (55") long (permanently attached to microphone), 1.6mm (0.06") diameter, 2-conductor shielded cable with locking 4-pin connector (wired only)
- AUDIO-TECHNICA CASE STYLE: M31
BP893 Submittal Sheet
426 kb
- Data Sheet
Request Quote
Suggested Products
by
Sennheiser
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
Audio-Technica U.S., Inc.
Model: BP893cW
Request more information from a dealer near you
close