Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
MicroEarset Omnidirectional Condenser Headworn Microphone with Lemo Connector
Model: BP893CL4
- Outstanding clarity and intelligibility
- Lightweight and ergonomic design
- Extremely unobtrusive, 1-inch flexible boom
- Secure over-the-ear placement
- Extended frequency response for natural vocal reproduction
Product Info
Tech Specs
Documents
MicroEarset omnidirectional condenser headworn microphone with 55" cable terminated with Lemo connector for Sennheiser wireless. BP893 omnidirectional condenser headworn microphone, less power module. 1.4m (55") permanently attached miniature cable terminated for Sennheiser wireless systems using Lemo connector. Includes AT8440 cable clip, two AT8157 windscreens, two AT8156 element covers, a moisture guard and a carrying case.
- Outstanding clarity and intelligibility
- Lightweight and ergonomic design
- Extremely unobtrusive, 1-inch flexible boom
- Secure over-the-ear placement
- Extended frequency response for natural vocal reproduction
- Fixed-charge back plate, permanently polarized condenser element
- Locking 4-pin microphone output connector compatible with included power module and all Audio-Technica UniPak body-pack wireless transmitters
- UniSteep filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
- Headset Mic Type - Condenser
- Headset Mic Type - Dynamic
- Microphone Connectivity - Wired
- Microphone Type - Condenser
- Polar/Pickup Pattern - Omnidirectional
- Warranty - Yes
- Spec Sheet available - Yes
- Cable Length: 1.40 m
- Cable Length: 140 cm
- Maximum Frequency Response (Bandwidth): 20,000 Hz
- Maximum Frequency Response (Bandwidth): 20 kHz
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Certifications: FCC
- Dynamic Range: 88 dB
- Impedance: 245 ohm
- Maximum SPL (Sound Pressure Level): 114 dB
- Sensitivity: -34 dB
- Signal to Noise Ratio: 68 dB
- Current Draw: 0 Amps
- DC Voltage: 52 Volts
- Product Weight: 0 kg
- Warranty (Length/Type): 2 Years Limited End-User
- Low Frequency Roll-off: 80 Hz 18 dB/octave (wired only)
- Open Circuit Sensitivity: -34 dB (19.9 mV) re 1V at 1 Pa
- Phantom Power Requirements: 11 to 52 V DC 2 mA typical (wired only)
- Current Consumption: 0.10 mA typical at 5V (wireless only)
- Voltage Range: 2.5 to 11 V (wireless only)
- Weight:
- Power module (wired only): 85g (3.0 oz)
- Dimensions:
- Microphone: 8.1 mm (0.32") long, 2.6 mm (0.10") diameter
Boom: 26.4 mm (1.04") long, 1.07 mm (0.04") diameter
Power module (wired only): 97.6 mm (3.84") long, 18.9 mm (0.74") diameter - OUTPUT CONNECTOR (POWER MODULE): Integral 3-pin XLRM-type
- Cable: 1.4 m (55") long (permanently attached to microphone), 1.6mm (0.06") diameter, 2-conductor shielded cable with locking 4-pin connector (wired only)
- AUDIO-TECHNICA CASE STYLE: M31
Headworn Microphone
426 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
Audio-Technica U.S., Inc.
Model: BP893CL4
Request more information from a dealer near you
close