Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
MicroSet Omnidirectional Condenser Headworn Microphone with 55" Cable Terminated
Model: BP892CL4
- Handles high sound pressure levels with ease
- Extremely intelligible natural audio
- Inconspicuous, lightweight headset with capsule diameter of just 2.6mm
- Ideal for applications requiring minimum visibility
- Ergonomic under-ear design flexible, lightweight contoured loop hooks behind the ear for an ultra-secure
Product Info
Tech Specs
Documents
MicroSet omnidirectional condenser headworn microphone with 55" cable terminated with Lemo connector for Sennheiser wireless. BP892 subminiature omnidirectional condenser headworn microphone, less power module. 1.4 m (55") permanently attached miniature cable terminated for Sennheiser wireless systems using locking 3.5 mm connector. Includes AT8440 cable clip, AT8464 dual-ear microphone mount, two AT8157 windscreens, two AT8156 element covers, a moisture guard and a carrying case.
- Handles high sound pressure levels with ease
- Extremely intelligible natural audio
- Inconspicuous, lightweight headset with capsule diameter of just 2.6mm
- Ideal for applications requiring minimum visibility
- Ergonomic under-ear design flexible, lightweight contoured loop hooks behind the ear for an ultra-secure
- Comfortable fit with or without glasses
- Comes equipped with AT8464 dual-ear microphone mount
- Converts single ear-worn MicroSet to a dual-ear-worn unit for maximum stability and comfort
- Fixed-charge back plate, permanently polarized condenser element
- Flat, roll-off (wired only) switch
- Accessories furnished:
-
BP892: AT8539 power module (wired only); AT8464 dual-ear microphone mount; AT8440 cable clip; two AT8157 windscreens; two AT8156 element covers; moisture guard; belt clip (wired only); carrying case
- Headset Mic Type - Condenser
- Microphone Connectivity - Wired
- Microphone Type - Condenser
- Polar/Pickup Pattern - Omnidirectional
- Warranty - Yes
- Spec Sheet available - Yes
- Cable Length: 1.40 m
- Cable Length: 140 cm
- Maximum Frequency Response (Bandwidth): 20,000 Hz
- Maximum Frequency Response (Bandwidth): 20 kHz
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Dynamic Range: 104 dB
- Impedance: 250 ohm
- Maximum SPL (Sound Pressure Level): 135 dB
- Sensitivity: -49 dB
- Signal to Noise Ratio: 63 dB
- Current Draw: 0 Amps
- DC Voltage: 52 Volts
- Height: 8.10 mm
- Warranty (Length/Type): 2 Years Limited End-User
- Certifications: FCC
- Low Frequency Roll-off: 80 Hz 18 dB/octave (wired only)
- Open Circuit Sensitivity: -49 dB (3.5 mV) re 1V at 1 Pa
- Phantom Power Requirements: 11 to 52 V DC 2 mA typical (wired only)
- Current Consumption: 0.10 mA typical at 5V (wireless only)
- Voltage Range: 2.5 to 11 V (wireless only)
- Weight:
- Power module (wired only): 85g (3.0 oz)
- Dimensions:
- Microphone: 8.1 mm (0.32") long, 2.6 mm (0.10") diameter
Boom: 98.4 mm (3.87") long, 1.07 mm (0.04") diameter
Power module (wired only): 97.6 mm (3.84") long, 18.9 mm (0.74") diameter - OUTPUT CONNECTOR (POWER MODULE): Integral 3-pin XLRM-type
- Cable: 1.4 m (55") long (permanently attached to microphone), 1.6mm (0.06") diameter, 2-conductor shielded cable with locking 4-pin connector (wired only)
- AUDIO-TECHNICA CASE STYLE: M31
Headworn Microphone
549 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
Audio-Technica U.S., Inc.
Model: BP892CL4
Request more information from a dealer near you
close