Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Subminiature Omnidirectional Condenser Headworn Microphone
Model: BP892
- Handles high sound pressure levels with ease
- Extremely intelligible natural audio
- Inconspicuous, lightweight headset with capsule diameter of just 2.6mm
- Ideal for applications requiring minimum visibility
- Ergonomic under-ear design flexible, lightweight contoured loop hooks behind the ear for an ultra-secure
Product Info
Tech Specs
Documents
Audio-Technica’s high-SPL BP892 MicroSet® offers the ultimate in low-profile, high-performance audio. Delivering clear and accurate sound in an inconspicuous package, the ultra-lightweight BP892 hooks securely behind either ear and can be worn for hours without fatigue. For maximum stability and comfort, the included AT8464 dual-ear microphone mount converts the MicroSet to a dual-ear-worn unit. The microphone features a flat, extended frequency response and other outstanding performance specifications, resulting in extremely intelligible, natural audio for stage and television talent, lecturers and houses of worship. Protected by a highly durable Parylene coating, the new headworn mic is built to stand up to the rigors of day-to-day use.
- Handles high sound pressure levels with ease
- Extremely intelligible natural audio
- Inconspicuous, lightweight headset with capsule diameter of just 2.6mm
- Ideal for applications requiring minimum visibility
- Ergonomic under-ear design flexible, lightweight contoured loop hooks behind the ear for an ultra-secure
- Comfortable fit with or without glasses
- Comes equipped with AT8464 dual-ear microphone mount
- Converts single ear-worn MicroSet to a dual-ear-worn unit for maximum stability and comfort
- Fixed-charge back plate, permanently polarized condenser element
- Flat, roll-off (wired only) switch
- High-pass filter on power module provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
- Headset Mic Type - Condenser
- Microphone Connectivity - Wireless
- Microphone Type - Condenser
- Polar/Pickup Pattern - Omnidirectional
- Warranty - Yes
- Spec Sheet available - Yes
- Cable Length: 1.40 m
- Cable Length: 140 cm
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Maximum Frequency Response (Bandwidth): 20 kHz
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Impedance: 250 ohm
- Maximum SPL (Sound Pressure Level): 135 dB
- Sensitivity: -49 dB
- Signal to Noise Ratio: 63 dB
- Current Draw: 0 Amps
- DC Voltage: 52 Volts
- Product Weight: 0 kg
- Warranty (Length/Type): 2 Years/Limited End-User
- Dynamic Range: 104 dB
- Low Frequency Roll-off:
- 80 Hz18 dB/octave (wired only)
- Open Circuit Sensitivity:
- -49 dB (3.5 mV) re 1V at 1 Pa
- Phantom Power Requirements:
- 11 to 52V DC, 2 mA typical (wired only)
- Current Consumption:
- 0.1mA typical at 5V (wireless only)
- Voltage Range:
- 2.5 to 11V (wireless only)
- Weight (Power Module):
- 85g (3.0 oz) (wired only)
- Dimensions:
- Microphone: 8.1 mm (0.32") long, 2.6 mm (0.10") diameter
- Boom: 98.4 mm (3.87") long, 1.07 mm (0.04") diameter
- Microphone: 8.1 mm (0.32") long, 2.6 mm (0.10") diameter
- DIMENSIONS (POWER MODULE):
- 97.6 mm (3.84") long, 18.9 mm (0.74") diameter (wired only)
- OUTPUT CONNECTOR (POWER MODULE):
- integral 3-pin XLRM-type
- Cable:
- 1.4 m (55") long (permanently attached to microphone), 1.6mm (0.06") diameter, 2-conductor shielded cable with locking 4-pin connector (wired only)
- Accessories Furnished:
- BP892: AT8539 power module (wired only); AT8464 dual-ear microphone mount; AT8440 cable clip; two AT8157 windscreens; two AT8156 element covers; moisture guard; belt clip (wired only); carrying case
- BP892-TH: AT8539 power module (wired only); AT8464-TH dual-ear microphone mount; AT8440 cable clip; two AT8157-TH windscreens; two AT8156-th element covers; moisture guard; belt clip (wired only); carrying case
- BP892: AT8539 power module (wired only); AT8464 dual-ear microphone mount; AT8440 cable clip; two AT8157 windscreens; two AT8156 element covers; moisture guard; belt clip (wired only); carrying case
- AUDIO-TECHNICA CASE STYLE:
- M31
BP892 Submittal Sheet
574 kb
- Data Sheet
Request Quote
Suggested Products
by
Sennheiser
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
Audio-Technica U.S., Inc.
Model: BP892
Request more information from a dealer near you
close