Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
2 x 2 Dante Audio Interface
Model: unDIO2x2+
- Small form factor, can be unobtrusively located near analog sources or sinks
- Dual power (DC or PoE) means the unDIO2x2+ will work in systems with either standard or PoE Ethernet switches
- Five input gains to accommodate common line levels, phantom power and dynamic mics
- +48V phantom power per channel - powers virtually all types of phantom powered microphones typically used in installed AV systems
- Analog output gains software adjustable between 0dB and -60dB plus mute to accommodate all types of line input audio equipment both consumer and pro levels
Product Info
Tech Specs
Documents
The unDIO2x2+ I/O Interface is a 2in/2out, cost-effective way to add up to two channels (in and out) of Dante audio to any Dante based networked audio system. The unDIO2x2+’s small form factor and PoE power capability make it easy to put Dante connectivity wherever it’s needed - near the audio source or sink thereby eliminating costly and interference prone analog wiring. The unDIO2x2+ is an upgrade of the earlier unDIO2x2, and adds several features including true +48V phantom power, maximum input and output levels of +20dBu, added input gain settings, and full output level control.
- Small form factor, can be unobtrusively located near analog sources or sinks
- Dual power (DC or PoE) means the unDIO2x2+ will work in systems with either standard or PoE Ethernet switches
- Five input gains to accommodate common line levels, phantom power and dynamic mics
- +48V phantom power per channel - powers virtually all types of phantom powered microphones typically used in installed AV systems
- Analog output gains software adjustable between 0dB and -60dB plus mute to accommodate all types of line input audio equipment both consumer and pro levels
- Industry standard +20dBu maximum input levels (at 0dB input gain) and +20dBu maximum output levels
- Full Dante system status LEDs on the front panel
- Applications:
- Addition of microphones or other sources where analog cabling would be expensive or is not available back to a central rack
- Network enable analog input power amplifiers or powered speakers
- Multi-point network audio distribution
- Input/Output Board/Card Type - Audio
- ROHS Compliant - Yes
- Spec Sheet available - Yes
- Depth: 87.63 mm
- Height: 26.92 mm
- Width: 163.83 mm
- Certifications: CE, FCC
- Operating Temperature (Maximum): 40 C
- Operating Temperature (Minimum): 0 C
Audio Interface
758581 kb
- Data Sheet
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
Attero Tech, LLC
Model: unDIO2x2+
Request more information from a dealer near you
close