Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
4-channel 500W Protea Equipped Network DSP Amplifier
Series: pema Series
Model: pema4250
- 4 or 8-channel amplifier
- 8 built-in mic pre’s
- 2-bit SHARC DSP
- Dedicated telephone/PBX input
- Post DSP Aux line level outputs
Product Info
Tech Specs
Documents
Pema sets new industry benchmark for value-engineered zone sound systems. By seamlessly merging Ashly’s powerful, open-architecture DSP functionality with Ashly’s renowned amplifier performance inside two-rack space unit, pema lowers overall system cost, occupies less space, improves energy efficiency, and both speeds and simplifies system installation and programming. Four and eight amplifier channel versions are available at both 125 and 250 Watts per channel. Full 96kHz performance is available on 32-bit SHARC processors for utterly transparent audio.
- 4 or 8-channel amplifier
- 8 built-in mic pre’s
- 2-bit SHARC DSP
- Dedicated telephone/PBX input
- Post DSP Aux line level outputs
- Stereo summed to mono
- Event scheduling (RTC)
- Adjustable HP/LP filters
- Ambient noise compensation
- Automatic feedback suppression
- 8-in x 8-out sophisticated matrix mixing
- Dual RCA and balanced euroblock inputs
- Built-in pink/white noise and sine wave generator
- Gain sharing automatic microphone mixing (Automixer)
- 125 or 250 watts per channel, Low-Z and constant voltage Models (70V and 100V)
- Amplifier Type - Power Amplifier
- Warranty - Yes
- Transformer Option - Yes
- Rackmountable - Yes
- Low Voltage Control - Yes
- Must be Level - Yes
- Dante Enabled - Yes
- Loudspeaker Voltage - 70V
- Loudspeaker Voltage - 100V
- Spec Sheet available - Yes
- Mount Type: Rack
- 100V Taps: 250 Watt
- 70V Taps: 250 Watt
- Certifications: FCC, CE
- Minimum Frequency Response (Bandwidth): 20 Hz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Signal to Noise Ratio: 105 dB
- Number of Inputs: 8
- Number of Channels: 4
- Total Harmonic Distortion + Noise (THD+N): 0.50 %
- Number of Watts Per Channel: 500 Watt
- Number of Outputs: 4
- Rack Units (Height): 2
- Active Power: 200 Watt
- Current Draw: 2.60 Amps
- Operating Temperature (Maximum): 49 C
- Operating Temperature (Minimum): 4 C
- Maximum Frequency Response (Bandwidth): 20 kHz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Low Voltage Control: Yes
- Rackmountable: Yes
- Transformer Option: Yes
- Depth: 393.70 mm
- Height: 88.90 mm
- Width: 482.60 mm
- Product Weight: 9.53 kg
- Thermal Dissipation (1/3 Power Sine Wave): 378 BTU/Hour
- Must be Level: Yes
- AC Voltage: 120 Volts
- Warranty (Length/Type): 5 Years Limited
Power Amplifier
792 kb
- Data Sheet
Power Amplifier
2138 kb
- Other
Request Quote
Suggested Products
by
Crestron Electronics, Inc.
by
Crestron Electronics, Inc.
by
Crestron Electronics, Inc.
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
Ashly Audio, Inc.
Model: pema4250
Request more information from a dealer near you
close