Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
4-channel 250W Protea Equipped Network DSP Power Amplifier
Series: pema Series
Model: pema4125
Part #: 1212-1212
- 4 or 8-channel amplifier
- 8 built-in mic pre’s
- 2-bit SHARC DSP
- Dedicated telephone/PBX input
- Post DSP Aux line level outputs
Product Info
Tech Specs
Documents
Pema sets new industry benchmark for value-engineered zone sound systems. By seamlessly merging Ashly’s powerful, open-architecture DSP functionality with Ashly’s renowned amplifier performance inside two-rack space unit, pema lowers overall system cost, occupies less space, improves energy efficiency, and both speeds and simplifies system installation and programming. Four and eight amplifier channel versions are available at both 125 and 250 Watts per channel. Full 96kHz performance is available on 32-bit SHARC processors for utterly transparent audio.
- 4 or 8-channel amplifier
- 8 built-in mic pre’s
- 2-bit SHARC DSP
- Dedicated telephone/PBX input
- Post DSP Aux line level outputs
- Stereo summed to mono
- Event scheduling (RTC)
- Adjustable HP/LP filters
- Ambient noise compensation
- Automatic feedback suppression
- 8-in x 8-out sophisticated matrix mixing
- Dual RCA and balanced euroblock inputs
- Built-in pink/white noise and sine wave generator
- Gain sharing automatic microphone mixing (Automixer)
- 125 or 250 watts per channel, Low-Z and constant voltage Models (70V and 100V)
- Amplifier Type - Power Amplifier
- Warranty - Yes
- Transformer Option - Yes
- Rackmountable - Yes
- Low Voltage Control - Yes
- Must be Level - Yes
- Dante Enabled - Yes
- Loudspeaker Voltage - 70V
- Loudspeaker Voltage - 100V
- Spec Sheet available - Yes
- Warranty (Length/Type): 5 Years Limited
- AC Voltage: 120 Volts
- Operating Temperature (Maximum): 49 C
- Operating Temperature (Minimum): 4 C
- Maximum Frequency Response (Bandwidth): 20 kHz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Low Voltage Control: Yes
- Must be Level: Yes
- Rackmountable: Yes
- Transformer Option: Yes
- Depth: 393.70 mm
- Height: 88.90 mm
- Width: 482.60 mm
- Product Weight: 9.53 kg
- Thermal Dissipation (1/3 Power Sine Wave): 251 BTU/Hour
- Current Draw: 1.70 Amps
- Active Power: 125 Watt
- Rack Units (Height): 2
- Number of Outputs: 4
- Number of Watts Per Channel: 250 Watt
- Total Harmonic Distortion + Noise (THD+N): 0.50 %
- Number of Channels: 4
- Number of Inputs: 8
- Signal to Noise Ratio: 102 dB
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 20 Hz
- Certifications: FCC, CE
- 70V Taps: 125 Watt
- 100V Taps: 125 Watt
- Mount Type: Rack
Power Amplifier
792 kb
- Data Sheet
Power Amplifier
2138 kb
- Other
Request Quote
Suggested Products
by
Crestron Electronics, Inc.
by
Crestron Electronics, Inc.
by
Crestron Electronics, Inc.
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
Ashly Audio, Inc.
Model: pema4125
Request more information from a dealer near you
close