Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Six Channel Opto-Coupler Noise Gate
Model: Sixgate
- Individual release, depth and threshold controls
- Hardwire bypass IN/OUT switch with status LED
- Open/closed gate status LED
- Marker panel for labeling gate assigns
- Balanced inputs and outputs, on balanced jack connectors
Product Info
Tech Specs
Documents
The noise gate shall be a six channel unit in a steel chassis six inches deep and one rack unit high. Each channel shall be independent of the others, and have variable controls for Release, Depth and Threshold. Release times shall be program dependent. Each channel shall also have a hardwire Bypass switch on the front panel, and three LED indicators to show gate open, closed and active status. The unit shall have electronically Balanced inputs and outputs, on Tip Ring Sleeve (TRS) jack connectors (Tip +, Ring –, Sleeve Ground, with an Input impedance of 20 Kohms (10 Kohms unbalanced).
- Individual release, depth and threshold controls
- Hardwire bypass IN/OUT switch with status LED
- Open/closed gate status LED
- Marker panel for labeling gate assigns
- Balanced inputs and outputs, on balanced jack connectors
- Side chain insert/key input tip ring sleeve jack on each channel
- AC input connector, with voltage switch and fuse
- Attack time program dependent using high-speed optocouplers
- Release time user variable
- Width: 482 mm 19 in
- Height: 44 mm 1¾ in
- Depth: 155 mm 6 in
- Input Impedance- balanced: 20 k ohms
- Input impedance- Unbalanced: 10 k ohms
- Input Headroom: + 22 dB
- CMRR: >60 dB, 20 Hz to 20 kHz
- Output Impedance- balanced: 300 ohms
- Output Impedance-Unbalanced: 150 ohms
- Output Level: (Max) + 20 dB
- Frequency Response: 20Hz to 20KHz, ±0.2dB
- Gate closed: -95 dB Unweighted, -105 dB 'A' weighted
- Gate Open, depth minimum: -93.5 dB Unweighted, -98dB 'A' weighted
- Distortion: 0 .01% THD @ 0dB, 1KHz
- Dynamic Range: 125 dB
- Input and Output Connector type: Balanced Jack
- Sidechain Insert Connector: Tip RingSleeve Jack
- Sidechain Insert Impedance: 10 kohm
- Power Requirements: 100/120, 220/240 V AC
Six Channel Opto-coupler Noise Gate
78 kb
- Brochure
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
ARX Systems
Model: Sixgate
Request more information from a dealer near you
close