Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Compact Active Direct box with Single Channel Unit
Series: Audibox
Model: Pro-DI
- –20 dB Pad and audio ground lift switches, plus phantom or 12V DC power options
- Security features include Kensington-type computer lock slot and optional bracket kit for under-table mounting
- Construction is of all-steel powder-coated chassis and fiberglass PCB
Product Info
Tech Specs
Documents
Pro-DI is a flexible, compact active Direct box, with normal high impedance input as well as a separate speaker level input for connection to an aux speaker output on the back of instrument amplifiers. Heavy duty all-steel chassis finished in attractive matte textured powder-coated, with hard-wearing epoxy screen printing and slip resistant rubber pads.
- –20 dB Pad and audio ground lift switches, plus phantom or 12V DC power options
- Security features include Kensington-type computer lock slot and optional bracket kit for under-table mounting
- Construction is of all-steel powder-coated chassis and fiberglass PCB
- Input Impedance: 1 meg ohm
- Frequency Response: 20Hz to 20KHz, ± 0.2 dB
- Max Input Level: +12 dB Phantom powered, +8 dB using 12 VDC Power Supply
- Input Impedance: 1 meg ohm
- Max Output Level (nominal): +12 dB 10K Ohm load using Phantom power, +11 dB 600 Ohm load using 12 VDC Power Supply
- Output Impedance: 680 ohms Balanced
- Output Signal To Noise: -100 dB unweighted, -104 dB A weighted
- Dynamic Range: 112 dB 10K Ohm load using 12 VDC Power Supply
- Distortion @100 Hz: 0.0025%, @1KHz 0.0026%, @10KHz 0.0033%
- Frequency Response: 20Hz to 20KHz, ± 0.2 dB
- Gain through Unit: 6 dB Normal input, Pad switch out
- Power Requirements: 48V Phantom power on XLR pins 2 and 3; 12-15V DC from external supply
- Pad Switch: -20 dB attenuation
- Speaker Input: -40 dB attenuation, equivalent to 100:1 decrease in input level -60 dB attenuation available when Pad switch also enabled
- Input Connectors: Insulated jacks
- Output Connector: 3 pin XLR. Wired Pin 1 Ground, Pin 2 + Hot, Pin 3 - Cold Audio Ground (Pin 1) lift switch fitted
Pro-DI
666 kb
- Brochure
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
ARX Systems
Model: Pro-DI
Request more information from a dealer near you
close