Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Transformer Isolated Microphone/Line Splitter
Model: MSX 48
- 16 x Hardwired balanced XLR input and main outputs: pin 3-, pin 2 +, pin 1 ground
- 16 x Hardwired transformer isolated balanced XLR monitor splits: in 3-, pin 2 +, pin 1 floating (not connected)
- Numbered marker panel for labeling individual channel assigns
- 16 x Hardwired transformer isolated balanced XLR auxiliary splits: pin 3–, pin 2 +, pin 1 floating (not connected)
- 2 x D Sub connectors for monitor splits
Product Info
Tech Specs
Documents
MSX 48 is a transformer isolated ultra low noise microphone/line splitter with 16 channels. Each of these channels has a direct looped main/FOH feed, and a transformer isolated monitor split on the front panel. On the rear panel is an auxiliary transformer isolated split ideal for use with a remote recording truck or TV feed. Duplicates of the monitor and aux splits are also provided on two sets of dual 25 pin D connectors on the rear panel, wired to Tascam wiring protocol.
- 16 x Hardwired balanced XLR input and main outputs: pin 3-, pin 2 +, pin 1 ground
- 16 x Hardwired transformer isolated balanced XLR monitor splits: in 3-, pin 2 +, pin 1 floating (not connected)
- Numbered marker panel for labeling individual channel assigns
- 16 x Hardwired transformer isolated balanced XLR auxiliary splits: pin 3–, pin 2 +, pin 1 floating (not connected)
- 2 x D Sub connectors for monitor splits
- 2 x D Sub connectors for auxiliary splits
- Screw terminal chassis ground point
- Sixteen channel/three way split per channel
- Passive unit - no power required
- Ultra low noise design
- D sub connectors on rear panel for monitor and auxiliary splits (Tascam wiring)
- Transformer balanced inputs and outputs
- Inputs and main outputs hard wired to pass phantom power
- Intuitive, 'user friendly' layout
- Flawless audio performance
- Input Impedance: 300 ohms
- Frequency Response: 30Hz to 20 KHz ± 1dB
- Input Impedance: 300 ohms
- Frequency Response: 30Hz to 20 KHz ± 1dB
- Input Impedance: 300 ohms
- Frequency Response: 30Hz to 20 KHz ± 1dB
- Input Impedance: 300 ohms
- Output Impedance: 2 secondaries @ 600 Ohms each
- Frequency Response: 30Hz to 20 KHz ± 1dB
- Maximum Output Level: + 20 dBm
- THD at Max Output: 0.2% 30 Hz to 20KHz @ 20dBm
- Insertion Loss: 0.5dB @ 1 KHz 600 Ohm source & load
- Input Connectors: 3 pin female XLR wired Pin 2 + Hot, Pin 3 – Cold
- Main Output: 3 Pin male XLR wired Pin 2 + Hot, Pin 3 – Cold
- Monitor and Aux Output: 3 pin male XLR wired Pin 2 + Hot, Pin 3 – Cold. Audio grounds not connected; Pin 1 is floating
MSX 48
79 kb
- Brochure
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
ARX Systems
Model: MSX 48
Request more information from a dealer near you
close