Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Active Microphone/Line Splitter
Model: MSX 32
- Eight channel/four way split per channel
- Channels linkable up to 1 in, 32 out
- Ultra low noise design
- 'SilentSwitch' Phantom Power switching
- –20 dB pad switch
Product Info
Tech Specs
Documents
The MSX 32 consists of eight channels of actively buffered ultra low noise microphone/line splitter. Each of these channels has four electronically balanced splits– two outputs on the rear panel for main and monitor, plus two more output splits on the front panel. All splits have the option of transformer balancing if so specified. Gain through the MSX 32 can be set individually by the small DIP switches on the rear of each channel, from 0dB through to +40 dB in 10 dB steps A ‘Link’ switch links each channel to the previous one, providing an ultimate maximum of 32 Outputs from a single input. An indicator LED shows when this is active. A Clip LED indicates imminent signal overload through the channel, and a numbered marker panel on the front provides a space where individual channel connections can be noted. Number stickers are provided to give each channel an individual number for up to 40 channels when multiple MSX32s are being used.
- Eight channel/four way split per channel
- Channels linkable up to 1 in, 32 out
- Ultra low noise design
- 'SilentSwitch' Phantom Power switching
- –20 dB pad switch
- 0 to +40 dB gain available via rear switches
- Headphone monitoring and PFL metering
- Electronically balanced inputs and outputs (standard)
- Transformer balanced outputs option
- Intuitive, 'user friendly' layout
- Flawless audio performance
- A and B balanced XLR output splits channels 1 through 8. Pin 3–-, Pin 2 +, Pin 1 ground
- PFL (Pre Fade Listening) switch
- 48V phantom power switch and LED
- Channel link switch and LED
- –20dB pad switch and LED
- Numbered marker panel for labeling individual channel assigns
- Headphone level control and connector
- 6 LED PFL metering: -40, -12, -6, 0, +3 and +6dB
- Illuminated AC power switch
- Rack handles
- Balanced XLR input channels 1 through 8. Pin 3 –, Pin 2 +, Pin 1 Ground
- Gain DIP switches 0, +10, +20, +30, +40dB
- Balanced XLR main (FOH) output (same wiring as input) channels 1 through 8
- Balanced XLR monitor output (same wiring as input) channels 1 through 8
- PFL input and output loop XLR connectors. Pin 3 –, Pin 2 +, Pin 1 Ground
- Width: 482 mm 19 in
- Height: 89 mm 3½ in
- Depth: 200 mm 8 in
- Signal / Noise Ratio: -94 dB
- Distortion: 0.008 % at 20 Hz to 20 KHz
- Gain through unit Switchable: 0, +10, +20, +30, +40 dB
- Maximum Output: +24 dB
- Pad Switch: –20 dB attenuation
- Phantom Power: 48 V DC slow turn on/turn off
- Output Impedance: 100 ohms Electronically balanced (optional transformer balancing is available)
- Clip LED: 1 dB before clipping
- Headphone Output: 2 W 8 ohms
- AC Mains Input Fused: IEC socket
- AC Power: 100 to 120V AC/2 A, 220 to 240V AC/1 A
- Transformer Type: Low noise shielded toroidal
MSX 32
122 kb
- Brochure
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
ARX Systems
Model: MSX 32
Request more information from a dealer near you
close