Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Transformer Isolated Microphone/Line Splitter
Model: MSX 12
- Four channel/three way split per channel
- Passive unit - no power required
- Ultra low noise design
- Transformer balanced inputs and outputs
- Inputs and main outputs hard wired to pass phantom power
Product Info
Tech Specs
Documents
Its intuitive layout and clear, uncluttered labelling enables a quick and easy solution to the increasing complexity of today’s standards of audio production. The ARX MSX 12 Transformer isolated Microphone/Line Splitter has been developed to deliver noise-free audio splitting with minimal setup time. Its intuitive layout and clear, uncluttered labelling enables a quick and easy solution to the increasing complexity of today’s standards of audio production.The MSX 12 is a totally passive device requiring no power, and consists of Four channels of transformer isolated ultra low noise Microphone/Line Splitter. Each of these channels has a direct looped Main/FOH feed, and a transformer isolated Monitor split on the front panel.On the rear panel is an Auxiliary transformer isolated split ideal for use with a remote recording truck or TV feed.
- Four channel/three way split per channel
- Passive unit - no power required
- Ultra low noise design
- Transformer balanced inputs and outputs
- Inputs and main outputs hard wired to pass phantom power
- Intuitive, 'user friendly' layout
- Flawless audio performance
- 4 x hardwired balanced XLR input and pin 3–, pin 2 +, pin 1 ground main outputs
- 4 x hardwired transformer isolated balanced XLR monitor splits: pin 3–, pin 2 +, pin 1 floating (not connected)
- Marker panel for labelling individual channel assigns
- 4 x Hardwired transformer isolated balanced XLR auxiliary splits: Pin 3–, Pin 2 +, Pin 1 floating (not connected)
- 2 x D Sub connectors for monitor splits
- 2 x D Sub connectors for auxiliary splits
- Screw terminal chassis ground point
- Input Impedance: 300 ohms
- Output Impedance 2 secondaries: 600 ohms each
- Frequency Response: 30 Hz to 20 KHz ± 1dB
- Maximum Output Level: +20 dBm
- THD at Maximum Output: 0.2 % at 30 Hz to 20 KHz, 20 dBm
- Insertion Loss: 0.50 dB at 1 KHz (600 ohm sources and load)
- Input Connectors: 3 pin female XLR wired pin 2 + hot, pin 3 – cold
- Main Output: 3 Pin male XLR wired pin 2 + hot, pin 3 – cold
- Monitor and Aux Output: Split 3 pin male XLR wired pin 2 + hot, pin 3 – cold. audio grounds not connected, pin 1 is floating
Transformer Isolated Microphone/Line Splitter
518 kb
- Brochure
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
ARX Systems
Model: MSX 12
Request more information from a dealer near you
close