Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Six Channel Active Direct Box, Microphone/Line Splitter and Line Mixer
Series: Audibox
Model: DI6SM
- Hi impedance (Hi Z) insulated jack input and output connectors
- Level control with up to +15dB of gain available
- Clip LED indicator
- Marker panels for labeling DI assigns
- Master level controls
Product Info
Tech Specs
Documents
This unique and flexible audio toolbox allows six independent unbalanced audio sources to easily and quietly interface with balanced pro audio systems, either to individual channels or summed down to one master output. The unit shall be capable of operating in four modes: firstly, as six active direct boxes, secondly, as a 6:1 line mixer, thirdly, as a 1:6 line splitter, and fourth, as a 1:6 microphone splitter. It shall be capable of operating concurrently in the first two modes, and there shall be rear panel switches to facilitate the microphone or line splitter mode. There shall be also be a master level control, which operates in all modes. Each channel shall have a high impedance input and output jack, a level control from 00 through to +15dB, and an LED to indicate the onset of circuit overload. Each channel shall have a corresponding electronically balanced XLR output connector, with audio ground lift switch and status LED.
- Hi impedance (Hi Z) insulated jack input and output connectors
- Level control with up to +15dB of gain available
- Clip LED indicator
- Marker panels for labeling DI assigns
- Master level controls
- Status LEDs for DI+Mixer or splitter modes, phantom power
- Mix output jack
- Balanced XLR outputs
- Individual audio ground lift switches and status LEDs
- XLR and jack master outputs
- XLR input for splitter operation and XLR loop output
- Splitter/DI + mixer mode switch
- Mic or line level input switch
- Phantom power switch
- AC input connector, with voltage switch and fuse
- Width: 482 mm 19 in
- Height: 44 mm 1¾ in
- Depth: 155 mm 6 in
- Signal to Noise: -90 dB unity gain
- Frequency Response: 10Hz to 20KHz ±0.5dB
- Channels: 1 to 6
- High Z input impedance: 2.2 M ohms
- Maximum channel gain: 15 dB
- Clip LED Illuminates: 1 dB prior to clip
- Direct Output Impedance: 300 ohms balanced
- Maximum Input Level: +20 dB
- Maximum Output Level: +21 dB
- Signal to Noise: -96 dB unity gain
- Distortion: < 0.004 % 1 KHz, +4 dB
- Output Connector: 3 pin XLR
- Maximum Level: + 20 dB
- Mic Input Gain: 20 to 60 dB
- Mic Input Impedance: 4 k ohms balanced
- Line Input Impedance: 20 k ohms balanced
- AC Power: 100 to 120, 220 to 240 V AC, 8 VA
- Product Weight: 2.20 kg
Six Channel Active Direct Box
90 kb
- Brochure
Request Quote
Suggested Products
by
MediaMatrix
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
ARX Systems
Model: DI6SM
Request more information from a dealer near you
close