Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Stereo Active Direct Box with NiMH Battery
Series: Audibox
Model: DI Plus2 RC
- Two high impedance unbalanced inputs on the front panel, running to balanced XLR outputs on the rear
- Accurate left and right channel level matching keeps the stereo image centered
- Level control
- Dual normal gain high impedance unbalanced inputs on the front panel, running to dual balanced XLR outputs on the rear
- Precision engineered
Product Info
Tech Specs
Documents
DI Plus2 RC with an internal long life NiMH (Nickel Metal Hydride) that can be charged off either the phantom power on the mic line, or via the 12V DC input, removing battery "throw away" as an issue. NiMH batteries exhibit no memory effect and a long life recharge cycle. The new DI Plus2 RC features a low noise high impedance input buffer with switchable 20dB Pad, and a low distortion high current output stage able to drive the longest cable runs. It represents another major step forward in active direct boxes.Packaged in a dual channel stand-alone format, the DI Plus2 RC represents a fresh look at active D.I. concepts.
- Two high impedance unbalanced inputs on the front panel, running to balanced XLR outputs on the rear
- Accurate left and right channel level matching keeps the stereo image centered
- Level control
- Dual normal gain high impedance unbalanced inputs on the front panel, running to dual balanced XLR outputs on the rear
- Precision engineered
- A global pad switch drops inputs by 20dB, making it suitable for all applications from the softest keyboard to the hottest broadcast levels
- Maximum Input Level: +12dB phantom powered; +6 dB Battery powered
- Input Impedance: 1 M ohms
- Maximum Output Level (at 10 k ohms load, phantom powered): +17 dB +12 dB at 10 k ohms load battery powered, +11 dB at 600 ohms load, phantom powered
- Output Impedance: 680 ohms Balanced
- Output Signal To Noise at unweighted: -100 dB -104 dB A weighted
- Dynamic Range (at 10 k ohms load, Phantom powered): 117 dB 112 dB at 10 k ohms load battery powered, 111 dB at 600 ohms load, phantom powered
- Distortion at 100 Hz: 0.0018 % 0.0028% at 1 KHz, 0.0056% at 10KHz
- Frequency Response: 20Hz to 20KHz ± 0.2 dB
- Gain through at unity gain: 6 dB Pad switch out
- Pad Switch: Global -20 dB attenuation
- Output Connectors: 3 pin XLR. Wired Pin 1 Ground, Pin 2 + Hot, Pin 3 - Cold
- Construction: All-steel chassis, fibreglass PCB, NiMH battery
DI Plus2 RC
153 kb
- Brochure
Request Quote
Suggested Products
by
Matrox Graphics Inc.
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
ARX Systems
Model: DI Plus2 RC
Request more information from a dealer near you
close