Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Enhanced Compressor Limiter with Front Panel Control, Wide Scale Metering
Series: Audibox
Model: Compo
- Channel A active/bypassed IN/OUT switch
- Threshold, ratio and output gain controls
- Numbered marker panel for labeling compressor assigns
- 5 Segment LED gain reduction display
- Above/below threshold status LEDs
Product Info
Tech Specs
Documents
The enhanced compressor/limiter is a dual channel unit in a steel chassis six inches deep and one rack unit high. There shall be a front panel switch to link the channels to track as a stereo pair. Each channel shall have a pair of LEDs for indicating above or below threshold, and a 5 segment LED gain reduction display, plus variable controls for threshold, ratio and output gain. Attack and release times shall be program dependent. Each channel shall also have a hardwire Bypass switch on the front panel, and a switch to control the enhance circuit. This circuit shall provide low frequency enhancement at 50 Hz, and High frequency enhancement at 10 KHz.
- Channel A active/bypassed IN/OUT switch
- Threshold, ratio and output gain controls
- Numbered marker panel for labeling compressor assigns
- 5 Segment LED gain reduction display
- Above/below threshold status LEDs
- Enhance switch and status LED
- Stereo link switch and status LED
- Channel B controls identical to channel A
- Balanced XLR input and output connectors
- Balanced TRS jack input and output connectors
- AC input connector, with voltage switch and fuse
- Width: 482 mm 19in
- Height: 44 mm 1¾in
- Depth: 155 mm 6in
- Input impedance-balanced: 20 k ohms
- Input impedance-Unbalanced: 10 k ohms
- Input Headroom: + 22 dB
- CMRR: >60 dB at 20 Hz to 20 KHz
- Output impedance-balanced: 300 ohms
- Output Impedance-Unbalanced: 150 ohms
- Output level maximum: +22 dB
- Frequency Response: 20Hz to 20KHz ±0.4dB
- Signal to noise ratio- Unweighted: -85 dB
- Signal to noise ratio-'A' weighted: -99 dB
- Distortion: 0.02% THD at 0 dB, 1 KHz
- Dynamic Range: 107 dB
- Low enhance: 50 Hz
- High enhance: 10 kHz
- Power Requirements: 100/120, 220/240 V AC
- Input/Output Connector Type: XLR, Balanced Jack
- Product Weight: 2.20 kg
Enhanced Compressor Limiter
65 kb
- Brochure
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
ARX Systems
Model: Compo
Request more information from a dealer near you
close