Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
1 or 2 In/16 Out Transformer Isolated Active Broadcast Splitter
Model: BSX 16
- 16 way active press/broadcast splitter with transformer isolation
- Splits 1 to 8 line level out and 9 to 16 switchable mic or line level
- Dual inputs with individual gain and level controls
- Dual loop outputs
- Additional XLR PA output connector on rear
Product Info
Tech Specs
Documents
BSX 16 is 1 or 2 in, 16 out transformer isolated active broadcast splitter. Developed to deliver the performance required by the increasingly sophisticated level of today’s standards of E.N.G and broadcast audio production. Numbered marker panels above or below each split provides a space where individual connections can be noted. Internally, powerful RF input filtering removes both common mode and differential interference at ultrasonic frequencies and above. High CMRR is achieved by the use of precision components throughout. Internal transformer based power supply is triple shielded to get the maximum benefit from the ultra low noise design of the circuitry. To sum up, this feature packed two RU device is the answer wherever multiple transformer output splits from up to 2 input signals are required.
- 16 way active press/broadcast splitter with transformer isolation
- Splits 1 to 8 line level out and 9 to 16 switchable mic or line level
- Dual inputs with individual gain and level controls
- Dual loop outputs
- Additional XLR PA output connector on rear
- Ultra low noise design
- 'SilentSwitch' 48V phantom power switching
- –20 dB pad switch on inputs
- Headphone monitoring
- LED meter on output
- Electronically balanced inputs
- Transformer isolated outputs
- Optional 12 V DC powering
- Intuitive and user friendly layout
- Flawless audio performance
- Spec Sheet available - Yes
- Signal to Noise ratio (Gain set at 20 dB) unweighted: –88 dB –94dB ‘A’ weighted
- Distortion at Unity Gain: 0.05 % 1 KHz
- Input Gain: 10 dB through to 50 dB
- Input Impedance: 4 k ohms
- Input Headroom: +21 dB
- Input Pad: –20 dB attenuation
- Maximum Output: +21 dB
- Output Impedance: 300 ohms Transformer Balanced
- Output Level (maximum): +20 dB Line out level: 10dB mic output level
- Frequency Response: 40Hz to 20KHz ±0.5 dB
- Phantom Power Switchable Global: +48 VDC slow turn on/turn off
- Transformer Type: Low noise shielded
- Outputs: 1 to 8 are Line Level (0dB)
- Outputs: 9 to 16 are switchable mic (-30dB), line (0dB) output Level
- Dynamic Range: 109
- Headphone Output: 500 mW at 8 ohms output
- Headphone Connector: 6.5mm TRS Jack wired mono
- LED output level indicators: -40, 0, +6 dB
- AC Mains Input: Fused IEC socket
- AC Power: 100 to 120 V AC/2 A, 220 to 240 V AC/10 VA Replace fuse with correct value only: 100 to 120 V AC/2 A, 220 to 240 V AC/1 A
BSX16_F_data.jpg
70 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
ARX Systems
Model: BSX 16
Request more information from a dealer near you
close