Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Multi Mode Enhanced Compressor Limiter
Series: Audibox
Model: Afterburner
- Hardwire bypass IN/OUT switch
- Threshold, ratio and output gain controls
- Above/below threshold LEDs
- 12 segment LED output Level display
- Numbered marker panel for labelling compressor assigns
Product Info
Tech Specs
Documents
Multi mode enhanced compressor limiter is a dual channel unit in a steel chassis 6 inches (152mm) deep and one rack unit (44mm) high. With front panel switch to link the channels to track as a stereo pair, and switch to put the unit into dual band mono mode; in this mode channel 1 controls low frequencies and channel 2 controls high frequencies. The filter is 6 dB per octave, phase corrected, with a dividing frequency of 250 Hz, and the unit with summed filter response of ± 0.2dB through the crossover region. Each channel has 12 segment LED output level display and a 7 segment LED gain reduction display, plus variable controls for threshold, ratio and output gain. There will be a switch to toggle the compressor knee between hard and soft, with associated LEDs. A further 2 LEDs shall indicate Above or below threshold status. Attack and release times can be programmed dependent.
- Hardwire bypass IN/OUT switch
- Threshold, ratio and output gain controls
- Above/below threshold LEDs
- 12 segment LED output Level display
- Numbered marker panel for labelling compressor assigns
- 7 segment LED gain reduction display
- Enhance switch and status LED
- Adaptive stereo link switch and status LED
- Dual/single channel mode switch and status LEDs
- Balanced inputs and outputs, on both XLR and TRS jack connectors
- In single channel (mono) mode, use channel 1 inputs and outputs only
- Sidechain insert TRS connector on each channel
- AC input connector with voltage switch and fuse
- Width: 482 mm 19 in
- Height: 44 mm 1¾ in
- Depth: 155 mm 6 in
- Input Impedance- balanced: 20 k ohms
- Input impedance- Unbalanced: 10 k ohms
- Input Headroom: +22 dB
- CMRR: >60 dB at 20 Hz to 20 KHz
- Output Impedance- balanced: 300 ohms
- Output Impedance-Unbalanced: 150 ohms
- Output Level (maximum): +22 dB
- Frequency Response: 20Hz to 20KHz ± 0.5dB
- Signal to noise ratio: -93 dB Unweighted: -98 dB 'A' weighted
- Distortion: 0.02 % THD at 0dB, 1KHz
- Dynamic Range: 115 dB
- Sidechain Insert Impedance: 10 k ohms
- Filter Type Phase corrected: 6dB/octave
- Summed Filter Response: ±0.2 dB through crossover region
- Dividing Frequency: 250 Hz
- Low enhance: 50 Hz
- High enhance: 10 kHz
- Power Requirements: 100/120, 220/240 VAC
- Input/Output Connector Type: XLR, Balanced Jack
- Sidechain Insert Connector: TRS Jack
- Product Weight: 2.20 kg
Multi Mode Enhanced Compressor Limiter
80 kb
- Brochure
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
ARX Systems
Model: Afterburner
Request more information from a dealer near you
close