Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
2 Mic / 4 Line In, 6 Line Out Main Processor
Series: iDR
Model: iDR-4
- iDR DSP system
- 16 processing channels (inputs and outputs)
- 2 analogue mic/line inputs on XLR with 20V phantom power
- 4 analogue line inputs on TRS jack
- 4 line outputs on XLR
Product Info
Tech Specs
Documents
The 1U rack or desk mount iDR-4 is the main unit in the iDR system having all the DSP (digital signal processing) power needed for 16 input and 16 output channels. The iDR-4 has a total of 6 balanced audio inputs including 2 XLR analogue mic/line and 4 TRS jack line inputs. It has 6 balanced audio outputs including 4 XLR analogue land 2 TRS jack line outputs. You can add a further 8 inputs and/or 8 outputs bringing it up to a maximum 14x14 matrix by plugging in the iDR-in and/or iDR-out audio expanders. The signal can be routed at three key points: the input source patch bay, central crosspoint matrix, and output source patch bay.
Although the iDR does not work with networked audio, the expanders can be located up to 250 metres away so providing remote analogue audio inputs and outputs connected using CAT5 cables. You can also daisy chain multiple iDR-4 and iDR-8 units in a distributed system. The units are linked using an 8 channel wide bus which plugs into the digital expander ports. Maximum matrix at any unit is 16x16 which includes the interconnecting bus. Several iDR units can be linked in this way, but you can have only one iDR-in and one iDR-out expander per system. This is described later.
Although the iDR does not work with networked audio, the expanders can be located up to 250 metres away so providing remote analogue audio inputs and outputs connected using CAT5 cables. You can also daisy chain multiple iDR-4 and iDR-8 units in a distributed system. The units are linked using an 8 channel wide bus which plugs into the digital expander ports. Maximum matrix at any unit is 16x16 which includes the interconnecting bus. Several iDR units can be linked in this way, but you can have only one iDR-in and one iDR-out expander per system. This is described later.
- iDR DSP system
- 16 processing channels (inputs and outputs)
- 2 analogue mic/line inputs on XLR with 20V phantom power
- 4 analogue line inputs on TRS jack
- 4 line outputs on XLR
- iDR-4ST version also available, with XLRs replaced by Euroblock (Phoenix) connectors
- 2 line outputs on TRS jack
- Digital audio expansion ports (8 channels in, 8 channels out)
- Hot Plug‘n’Play PL Series remote controllers
- High quality audio signal path and DSP processing
- Monitor with mouse and ripplethrough capability
- Warranty - Yes
- Spec Sheet available - Yes
- Depth: 350 mm
- Height: 48 mm
- Width: 440 mm
- Product Weight: 5 kg
- Warranty (Length/Type): 1 Year
- Minimum Frequency Response (Bandwidth): 20 Hz
- Minimum Frequency Response (Bandwidth): 0.02 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Maximum Frequency Response (Bandwidth): 20 kHz
- Number of Inputs: 16
- Number of Outputs: 16
- Total Harmonic Distortion + Noise (THD+N): 0.01 %
Digital Audio Mix Processor
5063 kb
- Data Sheet
Request Quote
Suggested Products
by
Dynacord
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
Allen & Heath
Model: iDR-4
Request more information from a dealer near you
close