Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Clip-On Microphone for Wind Iinstruments, Drums and Percussions
Model: C519 M (Single)
- Cardioid polar pattern - allows operation close to stage monitors
- Integrated transducer shock mount - for efficient rejection of mechanical noise
- Rubberized mounting clip - to firm, gentle fit on a wide variety of instruments
- Rugged highly stable gooseneck - for precise placement of the microphone
- Detachable microphone cable - easy to install and service
Product Info
Tech Specs
Documents
Horn section liberation
for brass and woodwind instruments on stage and in studio.
The C519 professional miniature condenser microphone clips gently onto the bell of a trumpet, saxophone, trombone, tuba, didgeridoo or any other wind instrument. Its tight cardioid polar pattern makes the C519 an ideal tool for use near monitor wedges, and its flat frequency response delivers a natural, powerful and clear sound.
The MPAV from C519 M features an integrated, switchable bass cut for adjusting the microphone's frequency response. The C519 ML package includes a mini-XLR cable and the unique A400 adapter plate for easy mounting onto wireless body-pack transmitters PT40/45/450/470.
for brass and woodwind instruments on stage and in studio.
The C519 professional miniature condenser microphone clips gently onto the bell of a trumpet, saxophone, trombone, tuba, didgeridoo or any other wind instrument. Its tight cardioid polar pattern makes the C519 an ideal tool for use near monitor wedges, and its flat frequency response delivers a natural, powerful and clear sound.
The MPAV from C519 M features an integrated, switchable bass cut for adjusting the microphone's frequency response. The C519 ML package includes a mini-XLR cable and the unique A400 adapter plate for easy mounting onto wireless body-pack transmitters PT40/45/450/470.
- Cardioid polar pattern - allows operation close to stage monitors
- Integrated transducer shock mount - for efficient rejection of mechanical noise
- Rubberized mounting clip - to firm, gentle fit on a wide variety of instruments
- Rugged highly stable gooseneck - for precise placement of the microphone
- Detachable microphone cable - easy to install and service
- Microphone Type - Condenser
- Impedance: < / = 200 ohms
- Sensitivity: 5 mV/Pa (-46 dBV) Maximum SPL 130/132dB SPL (bei k = 1 / 3%)
- Cable Length: 1.50 m
- Cable Length: 150 cm
- Maximum Frequency Response (Bandwidth): 20 kHz
- Maximum Frequency Response (Bandwidth): 20000 Hz
- Minimum Frequency Response (Bandwidth): 60 Hz
- Minimum Frequency Response (Bandwidth): 0.06 kHz
- Signal to Noise Ratio: 63 dB
- Width: 1193.80 mm
- Polar Pattern: cardiod
- Equivalent noise level (IEC 60268-4, A-weighted): 31 dB(A)
- Recommended Load Impedance: > / = 2000 ohms
- Powering: < / = 2 mA
- Power Requirement: B 29 L battery power supply, MPA V L phantom adapter, AKG WMS bodypack transmitters
- Connector: 3-pin mini XLR
- Finish: matte black
- Length (microphone only): 213 mm (8.4in)
- Net weight (microphone and cable): C 519 M: 195g (6.9oz); C 519 ML: 85g (3oz)
Datasheet for Clip-On Microphone
571813 kb
- Other
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
AKG Acoustics, U.S.
Model: C519 M (Single)
Request more information from a dealer near you
close