Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
The Ultimate in Tape Replacement
Series: Ki Pro Family
Model: Ki Pro Rack
Part #: KI-PRO-RACK-R0
- Transition to file-based workflows
- 10-bit, full raster recording
- RS-422 Control
- Familiar controls and operation
- Professional connections
Product Info
Tech Specs
Documents
The power of Ki Pro in a 1RU format, the perfect fit for broadcasters transitioning away from tape.
- Transition to file-based workflows
- 10-bit, full raster recording
- RS-422 Control
- Familiar controls and operation
- Professional connections
- Dual media drives
- Ethernet file transfer
- Integrated AJA hardware conversion
- Remote configuration and control
- Video Input: •Digital: 1 Channel, selectable input SD and HD-SDI (2xBNC), SMPTE-259/292/296 HDMI •Analog: SD/HD Component (3xBNCS): SMPTE/EBU N10, Betacam 525 line, Betacam 525J, YPbPr 12-bit A/D, 2x oversampling
- Video Output (all simultaneously active): •Digital: SD and HD-SDI, SMPTE-259/292/296 (1xBNC) HDMI •Analog: Composite (1xBNC): NTSC, NTSCJ, PAL 12-bit D/A, 8x oversampling SD/HD Component (3xBNCs): SD: SMPTE/EBU N10, Betacam 525 line, Betacam 525J, RGB 12-bit D/A, 8x oversampling HD: YPbPr, RGB 12-bit D/A, 2x oversampling
- Audio Input: •Digital: AES 24-bit, 8 channel, 48kHz (4xBNC) 24-bit SDI embedded audio, 8 channel, 48kHz HDMI embedded, 2 channel •Analog: 24-bit A/D, 2 channel balanced (2 XLR), 48kHz Input level: Line
- Audio Output: •Digital: AES 24-bit, 8 channel, 48kHz (4xBNC) 24-bit SDI embedded audio, 8 channel, 48kHz HDMI embedded, 2 channel •Analog: 24-bit D/A, 2 channel balanced XLR, 48kHz
- Network: •10/100/1000 Ethernet (RJ45) •Embedded webserver for remote control
- Panel User Interface: •2 x 20 character display, with dedicated buttons
- Timecode: •LTC timecode input and output via BNC •SDI embedded RP188 timecode •On-screen timecode display on SDI 2 output
- Serial Port: •RS-422 (slave pinout), 9-pin (available beginning with version 2.0 firmware)‚ Connector pinout is as follows: 1 GND 2 TX - 3 RX + 4 GND 5 No Connection 6 GND 7 TX + 8 RX - 9 GND Shell GND
- Hardware up conversion - 10-bit: •Anamorphic: full-screen •Pillar box 4:3: results in a 4:3 image in center of screen with black sidebars •Zoom 14:9: results in a 4:3 image zoomed slightly to fill a 14:9 image with black side bars •Zoom Letterbox: image zoomed to fill screen •Zoom Wide: combination of zoom and horizontal stretch to fill 16:9 screen; this setting can introduce a small aspect ratio change
- Hardware down conversion - 10-bit: •Anamorphic: full-screen •Letterbox: image is reduced with black top and bottom added to image area with the aspect ratio preserved •Crop: image is cropped to fit new screen size
- Hardware cross conversion - 10-bit: •1080i to 720P •720P to 1080i
- Storage Module drive bays: •2 (each with eject button and select LED)
- Physical: •Height: 1.75" (4.45cm) •Width: 19" (48.26cm) •Depth: 12.5" front panel to the back of the deepest connector (37.75cm)
- Temperature: •Operating Temperature Range: 5C to 40C •Safe Storage Temperature Range (power OFF): -20C to 60C
- Power: •Voltage: 100-240 VAC •Typical operating power: 40W
Ki pro family brochure
10442 kb
- Brochure
Request Quote
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
AJA Video
Model: Ki Pro Rack
Request more information from a dealer near you
close