Pro AV Catalog
Manufacturers
PRODUCT CATEGORIES
Matching Keywords
Model Numbers
Request Quote
All Products
Power Amplifier with DC, VHF, Thermal and AC Protection
Series: fP
Model: fP 6400
- protection protects against infrasonic signals
- VHF protection protects the loudspeakers against strong very high frequency non-musical signals above the audible range
- Thermal protection prevents the amplifier from being overheated
- The protection indicators on the front panel are switched on, as a warning, before the protection process is initiated
- AC protection shuts down the power supply if the line voltage is outside the operating voltage
Product Info
Tech Specs
Documents
The fP Series power amplifier is lightweight, efficient, and powerful. With a regulated switch mode power supply, gain sensitivity selection, and sophisticated protection circuitry, we believe that they are the best choice for use with Adamson Speakers. Our two companies have had a long track record and have partnered to insure continued cross-user compatibility. 2 X 3200W at 2 Ohms.
- protection protects against infrasonic signals
- VHF protection protects the loudspeakers against strong very high frequency non-musical signals above the audible range
- Thermal protection prevents the amplifier from being overheated
- The protection indicators on the front panel are switched on, as a warning, before the protection process is initiated
- AC protection shuts down the power supply if the line voltage is outside the operating voltage
- Clip limiter prevents severely clipped waveforms from reaching the loudspeakers, whilst maintaining full peak power
- Amplifier Type - Power Amplifier
- Spec Sheet available - Yes
- Maximum output voltage - 8 ohms load: 62 to 104 Vrms
- Maximum output voltage - Peak voltage, no load: 88 to 149 Vrms
- Output Impedance: 60 M ohms
- Slew Rate: 20 V/uS
- Input Gain, selectable: 20, 23, 26, 29, 32, 35, 38, 41 dB
- Impedance: 20 k ohms
- Common Mode Rejection: 50 dB
- Operating Voltage: 130 to 265, 65 to 135 V AC
- Minimum start voltage: 175 and 95 V AC
- Peak inrush current (Soft start limited): 5 A
- Depth: 347.98 mm
- Height: 88.90 mm
- Width: 482.60 mm
- Product Weight: 10 kg
- Regulatory Compliance: CE Emission EN 55 103-1, E3 Immunity EN 55 103-2, E3, with S/N below 1% at normal operation level Safety EN 60 065, class I
Power Amplifier
198 kb
- Data Sheet
Request Quote
Suggested Products
Thank you!
Someone will be in touch with you shortly.
Contact InSight Systems Group Pty Ltd
close
InSight Systems Group Pty Ltd
8/170 Rooks Road
Vermont, Victoria 3133
Australia
1300 369 451
www.insightsystems.com.au
Contact in regards to this product:
Adamson Systems Engineering
Model: fP 6400
Request more information from a dealer near you
close