Cables & Connectors : Fibre Optic Cables : Kramer Electronics Australia - C-FODM/FODM-33

Fiber Optic/DVI Hybrid Cable with Converters

Model: C-FODM/FODM-33

Part #: 94-095211010

Quality Construction - Kramer FODM cables comply with the DVI standard and support the DDC2B mode. They are very flexible and usually do not require external power, making them very “installer friendly”
HDCP Compliant
High Resolution - Compatible with all DVI single link and HDTV standards up to 1080p and all VESA resolutions up to WUXGA (1920x1200) at 60Hz refresh rate with 1 pixel/clock mode
Flexible Power Options - Can use either DC power from the graphic card or AC/DC power from an external +5V adapter that plugs into the connector
Varied Selection of Lengths - Available with black or orange jackets in versions of 10, 15.2, 20, 30, 50 and 100m (33 to 328ft)

More Product Information Below

Compare

Project List

Product Info

Tech Specs

Kramer’s all DVI cable system is constructed of high-performance hybrid cable containing fiber optic and copper wires terminated with DVI-D connectors on each end. They are designed to transmit DVI-D signals extremely long distances with pristine digital image quality video with the copper cable carrying additional data required for HDCP compliance.

Quality Construction - Kramer FODM cables comply with the DVI standard and support the DDC2B mode. They are very flexible and usually do not require external power, making them very “installer friendly”
HDCP Compliant
High Resolution - Compatible with all DVI single link and HDTV standards up to 1080p and all VESA resolutions up to WUXGA (1920x1200) at 60Hz refresh rate with 1 pixel/clock mode
Flexible Power Options - Can use either DC power from the graphic card or AC/DC power from an external +5V adapter that plugs into the connector
Varied Selection of Lengths - Available with black or orange jackets in versions of 10, 15.2, 20, 30, 50 and 100m (33 to 328ft)

Fiber Optic Connector Type - Other
FiberOptic Cable Type - Other

Compliance with DVI Standard: Supports DVI1.0 and DDC2B, fully implemented by fiber-optic communication, HDCP compatible
Extension Limit: 100m (328ft) for WXGA (1600 x 1200) @60Hz refresh rate
Bandwidth: Supports UXGA at 60Hz or 1.65Gbps bandwidth per graphic channel
Hybrid Fiber Optic Cable: Riser jacket of retardant PVC using 4 strands
Tensile Load: 1800 N
Minimum Bend Radius: 6.1 in)
Outer Cable Diameter: 0.13 in)
Power Consumption: 5 V DC
Clamping Strength to Cable: 14 kgf
Operting Temperature: 0 to +50 °C
Humidity: 5 to 85 %
Cable Length: 1005.84 cm
Cable Length: 10.06 m
Jacket Type: PVC

Suggested Products

Network Cable 100 Meter

by Bosch Conferencing and Public Address Systems

Network Cable Assembly, Optical Fiber, 5m

by Bosch Conferencing and Public Address Systems

Network Cable Assembly, Optical Fiber, 2m

by Bosch Conferencing and Public Address Systems