AMD100 is a feature packed, compact 1 RU Class D amplifier. Featuring the power of on board DSP processing, the connectivity of third party control via the RS485 port and the ability to support either the Australian Monitor ICON CP control panel or allow connection to a third party control system and a USB port for setup or for PC control. The Australian Monitor AMD100 represents the future of constant voltage amplification.
4 mic/line inputs + 4 Stereo source inputs
Stereo line output + Mono amplifier output (Constant voltage or Low impedance operation)
1 RU Class D design
20Hz – 20kHz frequency response (Stereo Line Output)
Low power contact closure
DSP processing on board with Parametric EQ, compressor, noise gate and high and low pass filters
Third party control via serial, Software GUI or via Australian Monitor
Icon-CP control panel
Remote VCA master volume control
Mic/Line inputs have 34 volt phantom power
Spec Sheet available - Yes
Shipping Weight:
8 kg (17.6lbs)
Depth:
410 mm
Height:
430 mm
Width:
44 mm
Product Weight:
6 kg
Operating Temperature (Maximum):
45 C
Operating Temperature (Minimum):
10 C
Frequency response Mic/Line Inputs - Line Level Output:
20 to 20kHz, -3dB
Frequency response Mic/Line Inputs - Amplifier Output:
60 to 20kHz, -3dB
Total Harmonic Distortion Mic/Line Inputs - Line Level Output <0.05%:
0dB gain
Total Harmonic Distortion Mic/Line Inputs - Line Level Output:
< 0.1% at 45dB gain
Phantom Power:
34 V DC
Crosstalk Between Channels:
> 80 dB
Signal to Noise Ratio - Mic/Line Input:
> 92 dB
Signal to Noise Ratio - Stereo Input:
> 91 dB
Power Output:
100 W
Thermal Dissipation - Idle:
15 W
Power Input AC Mains:
(230 to 240/115 to 120V) or +24V DC
Recommended Operating Humidity:
5 to 95 %
Shipping Dimensions:
140 x 540 x 410mm (5.51 x 21.3 x 16.1in)
