Products

Pro AV Catalog
RDL, Radio Design Labs - DS-RT2
Request Quote
All Products
rdl-radio-design-labs

DS-RT2 Remote Control Selector

Series:

Model: DS-RT2

  • Remote Selection of ON or OFF
  • Single-Button Selection for Each Function
  • Open-collector Switching
  • 3-wire or 4-wire Remote Wiring
  • Professional Aesthetic Appearance
Compare
Project List
Product Info
Tech Specs
Documents
The front panel of the DS-RT2 features two pushbuttons with two associated LEDs. Upon initial power-up, the OFF mode is selected. Touching the other button de-selects OFF and immediately selects ON. An LED adjacent to each button shows which mode is selected. In a typical installation, the DS-RT2 may be used to turn an audio or video source on or off. To turn on an audio source, the DS-RT2 may be connected to an RDL ST-SSR1 or ST-RX2 Solid-State Audio Switch. For video switching, an RDL TX-MVX may be used. In each of the above examples, only one output terminal is needed for triggering, therefore a single shielded pair (3-conductor cable) is required for remote connection. For more complex switching networks, both outputs (ON and OFF) may be used. In an audio or video control installation, the DS-RT2 may be mounted adjacent to an RDL remote volume control, such as the D-RLC2, D-RLC3 or RLC10K.
  • Remote Selection of ON or OFF
  • Single-Button Selection for Each Function
  • Open-collector Switching
  • 3-wire or 4-wire Remote Wiring
  • Professional Aesthetic Appearance
  • Companion to other RDL® Remote Controls
  • LED Indication
 
Request Quote